1-0125-111-0049-00
ESSER TWIN 700
 DOUBLE WALL HARDENED
 simple

Two-layer conveying pipe. The wear-resistant inner pipe is uniformly through-hardened to 63HRC over its entire length. The outer pipe is pressure bearing. The male-female geometry of the weld-end surfaces centers the pipe and seals it tightly. O-rings are used as sealing elements. Particularly suitable for GRP “High performance plastics” due to the tight tolerances and after additional treatments of internal surfaces. With 3/4 inch sleeve for connection of measuring instruments, secondary air lines, etc.

Sub CategoryDOUBLE WALL HARDENED
SERIESESSER TWIN 700
NOMINAL DIAMETER 125
END STYLE (Outlet-Norm) EN1092-1/32/H/DN125/PN10EN1092-1/02/DN125/PN10
END STYLE (Inlet) Weld-end/Loose flange (EN1092, Shape G, PN10)
END STYLE (Outlet) Weld-end/Loose flange (EN1092, Shape H, PN10)
WALL THICKNESS [MM] 8.2
Inner Wall 5
Outer Walll 3.2
NORMAL PRESSURE BAR 8
Weight 40.85
HARDNESS [HRC] 63
Outer Diameter mm 141.3
GFR High Performance Plastics X
en_USEN